|
Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfather Counter Flow Chiller. Avoid long lag time and off flavours by using the Grainfather Wortometer. Adjust your wort and water flow rates from the Grainfather Counter Flow Chiller by dialling in the exact wort temperature your specific yeast requires. The Wortometer is made from copper and is covered in a nickel coating. |
|
Method: 1. Ensure the counter flow wort chiller has been setup correctly as per the Grainfather instructions. Do not turn the tap on connected to the cooling water hose yet. 2. Ensure/both the Wortometer and chiller hose are clean. 3. Instead of inserting the chiller’s wort outlet hose back into the Grainfather through the hole in the centre of the Grainfather lid, connect it to any side of the Wortometer. 4. Connect the free side of the Wortometer to a 8 mm (0.3") inner diameter silicon hose of at least 1 meter (39") length, then insert the other end of this hose into the Grainfather through the hole in the centre of the Grainfather's lid. 5 Remove the temperature probe from the Grainfather boiler body, then insert it all the way into the Wortometer thermowell. The short silicon hose section should already be fitted over the outer part of the thermowell. It should grip onto the probe and keep it from falling out of the Wortometer during operation. |
| Package Contents |
| 1 x Brand New Grainfather Wortometer |
Wishlist is empty.
